الوصف
Key Specifications
-
Technology: German Technology.
-
Control System: Fully Digital.
-
Smart Control: Full control via mobile using the Smart Life app.
-
Remote Control: Operable from a distance of up to 3 meters.
-
Temperature Range: 30°C to 55°C.
-
Memory Function: Retains the last used settings.
-
Maximum Water Flow Rate: 7 liters/minute.
-
ECO Mode: Automatically adjusts power consumption based on water flow and desired temperature.
-
Water Supply Capacity: Supplies two showers, provided the distance does not exceed 7 meters.
-
Boost Power Mode: Extra Power feature with 8 levels for manual current draw control.
One-Click Temperature Settings
-
Children: 38°C.
-
Adults: 40°C.
-
Elderly: 42°C.
Comprehensive Safety Features
-
Overflow Protection: Protects against excessive water inflow.
-
Leakage Protection (E2): Protects against electrical or water leaks.
-
Freeze Protection: Prevents water from freezing inside the unit.
-
Dry-Burn Protection: Prevents operation without water.
-
Overheating Protection (E1): Protects against excessive water temperature.
Electrical Specifications
-
Power: 11,000W at 220V.
-
Power: 13,000W at 240V.
-
Current: 50A.
Installation Requirements
-
Wire Gauge: 6 × 2 mm.
-
Circuit Breaker: 50A–63A.
-
Maximum Water Pressure: 6 bar.
-
Minimum Operating Water Flow Rate: 1.2 L/min.
Warranty
Heater Installation Terms
-
Installation Request: Contact the company's hotline at 16495.
-
Important Note: Customers may open the carton only to take measurements. Installation must be performed exclusively by an authorized company technician.
Conditions and Restrictions for Installation
-
All plumbing work and mixer tap installations must be completed before installation.
-
Certified electrical wiring compatible with the heater's power rating must be provided.
-
A certified circuit breaker compatible with the heater's power rating must be provided.
-
No water pipes should be located at the designated installation point. Installation under these conditions is at the customer's own risk.
-
Water connections must be prepared by the customer, not the company.
-
Installation inside a gypsum board enclosure is prohibited to prevent damage in case of water leakage and to avoid maintenance difficulties. Installation under these conditions is at the customer's own risk.
-
Installation directly beneath a water source is prohibited. The heater may be installed under a sink only if positioned away from potential leakage sources.
-
Installation near a gas source is prohibited. A minimum distance of 100 cm must be maintained between the heater and any gas source.
-
21 kW and 24 kW (3-phase) heaters must be connected directly to the power source. External electrical connections are prohibited, and installation using such connections is at the customer's own risk.
-
Upside-down installation is prohibited. The heater must be installed vertically only.